Fuel Tech Experts
  • Contact
  • Help Articles
    • Air Intake Cleaning
    • Carbon Cleaners
    • Cetane Boosters
    • DPF Cleaning & Maintenance
    • EGR Cleaning & Maintenance
    • Engine Oils
    • Engine Tuning / Mapping & Tuning Boxes
    • Fleet & Commercial Solutions
    • Fuel Addtives
    • Fuel Quality
    • Fuel Saving
    • Fuel System Cleaning
    • Heating Oil Additives
    • Misfuelling Devices
    • Oil Additives
    • Reducing Emissions
    • TFSI Direct Injection Carbon
    • Turbo Cleaning & Maintenance
    • Waterless Engine Coolant

Tag Archives: remap

Engine Tuning / Mapping & Tuning Boxes

ECU Remapping and the Inadequate Preparation

April 30, 2015 Andy 2 Comments

There is now a multitude of companies that will remap the ECU on your vehicle. In most cases, this entails plugging a computer into the diagnostics port on your vehicle that directly communicates with the ECU. A technician reads the existing file on the ECU and overrides it with a new file. The new file has on it adjusted parameters that alter several characteristics of the engine. These include the amount of turbo boost pressure (if applicable), the fueling and ignition timing (if on a gasoline vehicle), and other such parameters.

After remapping a diesel engine, the exhaust’s smoke increases, particularly on heavy acceleration. Where you once had a small amount of smoke from your exhaust, you now have a problem with a severe amount of smoke. Any underlying running issues can be exacerbated with an engine remap. One thing that surprises me tremendously is that many companies do not carry out a health check. Many remap servicers are mobile; they do not have the necessary tools, equipment, or expertise to precheck the vehicle. As far as I have researched, barely any of them ensure that the fuel system is running correctly and that there isn’t an excess of carbon buildup.

If you push the engine by asking it to work harder and produce more power, you must ensure that you have the best platform to remap and gain that additional performance. To guarantee this, the first thing we advise is to carry out a health check. Make sure there are no error codes. Then combine the remap with a professional fuel system cleaner and carbon remover. The fuel system must be running efficiently before you remap your vehicle. On a petrol engine, it is essential that the ignition components, the ignition system, and the fuel system are performing optimally to maximize the benefits gained from a remap.

Wherever you go to have your vehicle remapped or chipped, ensure the service includes the necessary checks. Also, ensure you use a high-quality fuel system cleaner, particularly if your exhaust has any excess smoke. If you have extra smoke, I strongly advise resolving or checking the issue before performing a remap as it is likely to make it worse.

engine mappingremapsmoke
Engine Tuning / Mapping & Tuning Boxes

Why are ECU / Engine Remaps and Tuning Boxes so Effective?

April 30, 2015 Andy 10 Comments

When one purchases a vehicle, they likely expect engine ECUs to be optimally mapped prior to sale. While they are typically very well mapped, it is subjective whether or not it is done optimally.

In this article, I will look at engine/ECU remapping and chipping and the use of tuning boxes. I will explain why remapping works and, in most cases, why it is safe.

With most manufacturing, compromises have to be made. ECU maps are no different. Yes, manufacturers invest a great deal of time in engine tuning and testing in the harshest climates. However, tuning criteria are designed around extremes that do not necessarily fit the requirements of the average customer or where the vehicle will be used.

Manufacturers must adhere to and comply with various legislative constraints surrounding emissions and other parameters set by the different governing bodies. As a result, this may affect the quality of factory ECU maps regarding available performance and/or MPG.

Many manufacturers produce vehicles in their range that, to some degree, compete with each other and, in some cases, even share the same engine. For example, a VW Golf may share the same engine as a VW Polo or a Porsche Boxter competing with the Porsche 911. The point is that it would be marketing suicide for a Porsche 911 to be considered slower than its younger brother. As a result, some engines are intentionally detuned or, let’s say, not tuned to their full potential.

Furthermore, manufacturers are obligated to tune vehicles for wildly varying conditions, i.e., -40 to +130 degrees or very high altitudes where the air is much thinner. This is one of the reasons why engines run rich from the factory. It accommodates dramatic climatic conditions that the average driver will never see. Even with the latest technology in fuel and ignition control, compromises on engine tune still have to be made just in case the vehicle is used in such conditions.

Vehicles need to survive the factory warranty period without fault. For example, it’s not uncommon to find an engine that is detuned for torque output to ensure that the drivetrain doesn’t fail. This begs the question: Why would anyone want to remap/chip their vehicle if there is an increased risk of a component failure?

Well, here is the point I am trying to make here. Car manufacturers must tune vehicles to cater to mechanically unsympathetic customers! This is very important. Drivetrains or engines (as an example) can fail when they are abused or raced from cold. It is this type of customer and not your average enthusiast that manufacturers are trying to protect themselves against, at least within the factory warranty period.

Furthermore, fuel quality is not guaranteed. Customers embracing remaps are more inclined to use higher-quality branded fuels and/or fuel conditioners, unlike the average user. Manufacturers have little control over this, so engines are tuned accordingly and with a little to spare regarding turbo pressure, air/fuel ratio, ignition timing, etc.

A combination of the above is why we see so many forced induction engines running rich from the factory. This and all of the above give reputable tuners the opportunity to liberate additional performance safely and improve MPG from engines under certain conditions.

If in doubt, stick with reputable tuners and tuning box manufacturers, as this helps ensure you receive a well-developed tune.

Also, bear in mind that even though normally aspirated engines can be remapped, the gains are minimal when compared to forced induction engines. It would also be prudent to notify your car insurance provider.

UPDATE: We were asked how ECU remaps, or Tuning Boxes can improve MPG?

With naturally aspirated petrol engines, mpg gains are marginal at best. Minor adjustments can be made to ignition timing and air/fuel ratios, but both power and mpg gains are minimal. This is the case with virtually all non-forced induction engines.

With turbo or supercharged petrol engines, power gains are usually very good with tangible but small MPG gains. MPG gains are two-fold on forced induction petrol engines. Many turbocharged engines run very rich from the factory under acceleration (open loop lambda). By carefully leaning out the air/fuel mixture under open loop conditions, fuel consumption can be reduced. This is more difficult with more modern engines that utilise wideband lambda technology. That said, most gains (if any) are achieved by improving the spread of torque across the rev range or, in particular, lowering it. If more torque is available lower in the rev range, less throttle is required to achieve the same level of accelerative effort. Of course, more fuel may be required to achieve the additional torque but lowering engine RPM more than compensates for this. And this is where diesel engines excel…

Turbo diesel engines – excellent power (torque) gains and potential mpg gains. Most mpg gains are achieved in turbo diesel engines by using the principle described above – making more torque available lower in the rev range. If you used to use 40% throttle but now only have to use 35% throttle to achieve the same accelerative effort, then you will most likely save fuel once the novelty of the extra power has worn off!

I hope that helps.

dtuk tuning boxengine mappingengine tuningremaptuning box

categories

Categories
  • Air Intake Cleaning (1)
  • Best Motor Oil (2)
  • Biodiesel & Biofuels (2)
  • Car Emissions (1)
  • Carbon Cleaners (6)
  • Cetane Boosters (1)
  • DPF Cleaning & Maintenance (2)
  • EGR Cleaning & Maintenance (2)
  • Engine Cleaning (1)
  • Engine Flush & Compression Restore (2)
  • Engine Oils (2)
  • Engine Tuning / Mapping & Tuning Boxes (2)
  • Fleet & Commercial Solutions (1)
  • Fuel Addtives (9)
  • Fuel Quality (2)
  • Fuel Saving (6)
  • Fuel System Cleaning (8)
  • Heating Oil Additives (1)
  • Hybrids (1)
  • Misfuelling Devices (1)
  • Octane Boosters (2)
  • Oil Additives (1)
  • Pentosin (1)
  • Race Fuel (1)
  • Reducing Emissions (1)
  • Smart O Plug (1)
  • TFSI Direct Injection Carbon (1)
  • Turbo Cleaning & Maintenance (1)
  • Uncategorized (3)
  • Waterless Engine Coolant (1)

Archives

  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2020
  • April 2020
  • January 2017
  • February 2016
  • January 2016
  • September 2015
  • May 2015
  • April 2015

Tag Cloud

Tags
airflow sensor cleaners, ar6200, BS EN590, BS EN590 diesel, carbon removal, dpf cleaner, dpf cleaners, dpf cleaning, dpf removal, egr cleaner, egr cleaning, engine mapping, engine oil, engine oil quality, fuel additive, fuel additives, fuel catalyst, fuel conditioner, fuel conspiracy, Fuel Economy, fuel saver, fuel savers, fuel saving, fully synthetic oil, gas saver, gas savers, improve mpg, increase gas mileage, increase mpg, low sap oil, MON, mpg, mpg gains, octane, octane booster, octane test, oil additives, oil conspiracy, premium diesel, pump diesel, reduce fuel costs, remap, RON, standard diesel, tuning box
Contact us

Email: support@fueltechexperts.com

Info
  • Privacy Policy
  • Terms of Use
  • Sitemap
Find us on:

Subscribe

* indicates required

Copyright © 2011-2021 Fuel Tech Experts All Rights Reserved.